ёit{*SSKrSSKJr SSKJrJr SSKJr SSKJ r /r \ "SSSS 9SS j5r \ "SSSS 9SS j5r \ "SSSS 9SS j5r \ "SSSS 9S 5r\ "SSSS 9S5r\ "SSSS 9SSj5r\ "SSS9SSj5rg)N)check_variable_and_dtype)in_dygraph_mode in_pir_mode) LayerHelper) deprecatedz3.0.0zRThis API will be deprecated in the future, because it's just for old statics mode.)sincelevelreasonc [5(aS5e[5(aS5e[USSS/S5 [S0[ 5D6n U R 5n X R S-U/n U RU RXS9n U RU 5nUc[US -5*nU RSU/U /S .S U0UUUS .S 9 U RU5nU RU5$)an Note: Only receives Tensor as input. If your input is Tensor, please use conv2d Op.(base.layers.** :ref:`api_paddle_nn_functional_conv2d` ). This operator receives input sequences with variable length and other convolutional configuration parameters(num_filters, filter_size) to apply the convolution operation. It fills all-zero padding data on both sides of the sequence by default to ensure that the output is the same length as the input. You can customize the padding behavior by configuring the parameter :attr:`padding\_start` . **Warning:** the parameter :attr:`padding` take no effect and will be deprecated in the future. .. code-block:: text Here we will illustrate the details of the padding operation: For a mini-batch of 2 variable lengths sentences, containing 3, and 1 time-steps: Assumed input (X) is a [4, N] float Tensor, and for the sake of simplicity, we assume N=2. input.data = [[1, 1], [2, 2], [3, 3], [4, 4]] This is to say that input (X) has 4 words and the dimension of each word representation is 2. * Case1: If padding_start is -1 and filter_size is 3. The length of padding data is calculated as follows: up_pad_len = max(0, -padding_start) = 1 down_pad_len = max(0, filter_size + padding_start - 1) = 1 The output of the input sequence after padding is: data_after_padding = [[0, 0, 1, 1, 2, 2], [1, 1, 2, 2, 3, 3], [2, 2, 3, 3, 0, 0], [0, 0, 4, 4, 0, 0]] It will be multiplied by the filter weight to get the final output. Assume num_filters = 3 output.data = [[ 0.3234, -0.2334, 0.7433], [ 0.5646, 0.9464, -0.1223], [-0.1343, 0.5653, 0.4555], [ 0.9954, -0.1234, -0.1234]] output.shape = [4, 3] # 3 = num_filters output.lod = [[0, 3, 4]] # Remain the same Args: input (Tensor): Tensor with shape :math:`(M, K)`, where M is the total time-step of mini-batch and K is hidden_size of input. Only lod_level of 1 is supported. The data type should be float32 or float64. num_filters (int): the number of filters. filter_size (int): the height of filter. Specified filter width is not supported, the width is hidden_size by default. Default: 3. filter_stride (int, optional): stride of the filter. Currently only supports :attr:`stride` = 1. padding (bool, optional): the parameter :attr:`padding` take no effect and will be discarded in the future. Currently, it will always pad input to make sure the length of the output is the same as input whether :attr:`padding` is set true or false. Because the length of input sequence may be shorter than :attr:`filter\_size`, which will cause the convolution result to not be computed correctly. These padding data will not be trainable or updated while training. Default: True. padding_start (int): It is used to indicate the start index for padding the input sequence, which can be negative. The negative number means to pad :attr:`|padding_start|` time-steps of all-zero data at the beginning of each instance. The positive number means to skip :attr:`padding_start` time-steps of each instance, and it will pad :math:`filter\_size + padding\_start - 1` time-steps of all-zero data at the end of the sequence to ensure that the output is the same length as the input. If set None, the same length :math:`\\frac{filter\_size}{2}` of data will be filled on both sides of the sequence. If set 0, the length of :math:`filter\_size - 1` data is padded at the end of each input sequence. Default: None. bias_attr (ParamAttr): To specify the bias parameter property. Default: None, which means the default bias parameter property is used. See usage for details in :ref:`api_paddle_ParamAttr` . param_attr (ParamAttr): To specify the weight parameter property. Default: None, which means the default weight parameter property is used. See usage for details in :ref:`api_paddle_ParamAttr` . act (str): Activation to be applied to the output of this layer, such as tanh, softmax, sigmoid, relu. For more information, please refer to :ref:`api_guide_activations_en` . Default: None. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` . Returns: Tensor: Tensor with the same length as input. The data type is float32 or float64, which is same as input. Examples: .. code-block:: python >>> # doctest: +SKIP("env set will not work in ci check because import paddle in global_exec") >>> # set env var before import paddle to disable pir mode, following example code use os module. >>> import os >>> os.environ['FLAGS_enable_pir_api'] = '0' >>> import paddle >>> paddle.enable_static() >>> x = paddle.static.data(name='x', shape=[-1, 10], dtype='float32', lod_level=1) >>> x_conved = paddle.static.nn.sequence_conv(input=x, num_filters=2, filter_size=3, padding_start=-1) 4sequence layer is not supported in dygraph mode yet.sequence layer is not supported in pir mode, please set the environment variable FLAGS_enable_pir_api=0 to switch old static mode.inputfloat32float64 sequence_convr)attrshapedtype)XFilterOut) contextStride contextStart contextLengthtypeinputsoutputsattrs)r)rrrrlocals input_dtypercreate_parameter param_attr"create_variable_for_type_inferenceint append_opappend_bias_opappend_activation)r num_filters filter_size filter_stridepadding padding_start bias_attrr%actnamehelperr filter_shape filter_parampre_biaspre_acts ]/var/www/html/banglarbhumi/venv/lib/python3.13/site-packages/paddle/static/nn/sequence_lod.pyrrs0h  > }} M  wI. 5FH 5F    E++a.0+>L**   l+L88?H[A-..   #n !*)(  ##H-G  # #G ,,c[5(aS5e[5(aS5e[S 0[5D6n[ USSS/S5 UR 5nUR U5nURSSU0SU0S U0S 9 U$) a Note: The input type of the OP must be Tensor. For Tensor, use:** :ref:`api_paddle_nn_functional_softmax` A LoD-tensor can be regarded as several sequences, and this op apply softmax algo on each sequence. The shape of input Tensor can be :math:`[N, 1]` or :math:`[N]`, where :math:`N` is the sum of the length of all sequences. Recommended usage: :math:`[N]`. For i-th sequence in a mini-batch: .. math:: Out(X[lod[i]:lod[i+1]], :) = \\frac{\exp(X[lod[i]:lod[i+1], :])}{\sum(\exp(X[lod[i]:lod[i+1], :]))} For example, for a LoD-Tensor with 6 sequences ([3, 2, 4, 1, 2, 3] - sequence length list in order), the lod in the runtime is [[0, 3, 5, 9, 10, 12, 15]], then softmax will be computed among :math:`X[0:3,:],X[3:5,:],X[5:9,:],X[9:10,:],X[10:12,:],X[12:15,:]`, and :math:`N` turns out to be 15. .. code-block:: text *Case 1: Given: input.data = [0.7, 1, 0.6, 1.5, 1.1, 1.2, 0.2, 0.6, 1.9, 3.1, 2.5, 0.8, 0.1, 2.4, 1.3] input.lod = [[0, 3, 5, 9, 10, 12, 15]] then: output.data = [0.30724832, 0.41474187, 0.2780098, 0.59868765, 0.40131235, 0.2544242, 0.09359743, 0.13963096, 0.5123474, 1., 0.84553474, 0.15446526, 0.06995796, 0.69777346, 0.23226859] output.lod = [[0, 3, 5, 9, 10, 12, 15]] Args: input (Tensor):A Tensor with shape of :math:`[N, 1]` or :math:`[N]`, Recommended usage: :math:`[N]`. Supported data types: float32, float64. use_cudnn (bool, optional): Use cudnn kernel or not. Effective only when the cudnn version of the paddle library is installed and GPU is used for training or reasoning. Default: False. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Returns: Tensor: A LoD-Tensor which has the same shape and data type with input. Examples: .. code-block:: python >>> # doctest: +SKIP("env set will not work in ci check because import paddle in global_exec") >>> # set env var before import paddle to disable pir mode, following example code use os module. >>> import os >>> os.environ['FLAGS_enable_pir_api'] = '0' >>> import paddle >>> paddle.enable_static() >>> x = paddle.static.data(name='x', shape=[7, 1], ... dtype='float32', lod_level=1) >>> x_sequence_softmax_1 = paddle.static.nn.sequence_softmax(input=x) >>> y = paddle.static.data(name='y', shape=[7], ... dtype='float32', lod_level=1) >>> x_sequence_softmax_2 = paddle.static.nn.sequence_softmax(input=y) r rsequence_softmaxrrrrr use_cudnnr)r;)rrrr"rr#r&r()rr<r2r3r softmax_outs r8r;r;s\  > }} M  8vx 8F wI.0B    E;;EBK  U| $I&  r9c r[5(aS5e[5(aS5e[USSS/S5 [S 0[ 5D6nUR 5nUR U5nUR U5nURSSU0XgS.UR5UUS .S 9 US :XaS Ul U$)a Note: Only receives Tensor as input. If your input is Tensor, please use pool2d Op.(static.nn.** :ref:`api_paddle_nn_functional_avg_pool2d` or :ref:`api_paddle_nn_functional_max_pool2d` ). This operator only supports Tensor as input. It will apply specified pooling operation on the input Tensor. It pools features of all time-steps of each sequence at the last lod_level using :attr:`pool_type` mentioned in the parameters, such as sum, average, sqrt, etc. It supports six pool_type: - average: :math:`Out[i] = \\frac{\sum_i X_i}{N}` - sum: :math:`Out[i] = \sum_jX_{ij}` - sqrt: :math:`Out[i] = \\frac{\sum_jX_{ij}}{\sqrt{len(X_i)}}` - max: :math:`Out[i] = max(X_i)` - last: :math:`Out[i] = X_{N_i}` - first: :math:`Out[i]` = X_0 where :math:`N_i` is the length of i-th input sequence. .. code-block:: text Case 1: input is a 1-level Tensor and pad_value = 0.0: input.lod = [[0, 2, 5, 7, 7]] input.data = [[1.], [3.], [2.], [4.], [6.], [5.], [1.]] input.shape = [7, 1] output is Tensor: out.shape = [4, 1] with condition out.shape[0] == len(x.lod[-1]) == 4 for different pool_type: average: out.data = [[2.], [4.], [3.], [0.0]], where 2.=(1. + 3.)/2, 4.=(2. + 4. + 6.)/3, 3.=(5. + 1.)/2 sum : out.data = [[4.], [12.], [6.], [0.0]], where 4.=1. + 3., 12.=2. + 4. + 6., 6.=5. + 1. sqrt : out.data = [[2.82], [6.93], [4.24], [0.0]], where 2.82=(1. + 3.)/sqrt(2), 6.93=(2. + 4. + 6.)/sqrt(3), 4.24=(5. + 1.)/sqrt(2) max : out.data = [[3.], [6.], [5.], [0.0]], where 3.=max(1., 3.), 6.=max(2., 4., 6.), 5.=max(5., 1.) last : out.data = [[3.], [6.], [1.], [0.0]], where 3.=last(1., 3.), 6.=last(2., 4., 6.), 1.=last(5., 1.) first : out.data = [[1.], [2.], [5.], [0.0]], where 1.=first(1., 3.), 2.=first(2., 4., 6.), 5.=first(5., 1.) and all above [0.0] at last of out.data is padding data. Case 2: input is a 2-level Tensor containing 3 sequences with length info [2, 0, 3], where 0 means empty sequence. The first sequence contains 2 subsequence with length info [1, 2]; The last sequence contains 3 subsequence with length info [1, 0, 3]. input.lod = [[0, 2, 2, 5], [0, 1, 3, 4, 4, 7]] input.data = [[1.], [3.], [2.], [4.], [6.], [5.], [1.]] input.shape = [7, 1] If pool_typ = sum, it will apply pooling on last lod_level [0, 1, 3, 4, 4, 7]. pad_value = 0.0 output is Tensor: out.shape= [5, 1] out.lod = [[0, 2, 2, 5]] where out.shape[0] == len(x.lod[-1]) == 5 sum: out.data = [[1.], [5.], [4.], [0.0], [12.]] where 1.=1., 5.=3. + 2., 4.=4., 0.0=pad_value, 12.=6. + 5. + 1. Args: input (variable): Tensor with lod_level no more than 2. The data type should be float32 or float64. pool_type (str): The pooling type that supports average, sum, sqrt, max, last or first. is_test (bool): Only works when :attr:`pool_type` is max. If set False, a temporary Tensor maxIndex is created to record the index information corresponding to the maximum value, which is used for backward gradient calculation in the training phase. Default: False. pad_value (float): Used to pad the pooling result for empty input sequence. Default: 0.0 Returns: Tensor: Tensor after pooling with data type float32 or float64. Examples: .. code-block:: python >>> # doctest: +SKIP("env set will not work in ci check because import paddle in global_exec") >>> # set env var before import paddle to disable pir mode, following example code use os module. >>> import os >>> os.environ['FLAGS_enable_pir_api'] = '0' >>> import paddle >>> paddle.enable_static() >>> x = paddle.static.data(name='x', shape=[None, 10], dtype='float32', lod_level=1) >>> avg_x = paddle.static.nn.sequence_pool(input=x, pool_type='average') >>> sum_x = paddle.static.nn.sequence_pool(input=x, pool_type='sum') >>> sqrt_x = paddle.static.nn.sequence_pool(input=x, pool_type='sqrt') >>> max_x = paddle.static.nn.sequence_pool(input=x, pool_type='max') >>> last_x = paddle.static.nn.sequence_pool(input=x, pool_type='last') >>> first_x = paddle.static.nn.sequence_pool(input=x, pool_type='first') r rrrr sequence_poolr)rMaxIndex)pooltypeis_test pad_valuermaxT)r?) rrrrr"r#r&r(upper stop_gradient)r pool_typerBrCr3rpool_out max_indexs r8r?r?s@  > }} M  wI. 5FH 5F    E88?H99%@I  U| 8!)"  E"&  Or9c6[USSS/S5 [USS9$)a  Only supports Tensor as input. Given the input Tensor, it will select first time-step feature of each sequence as output. .. code-block:: text Case 1: input is 1-level Tensor: input.lod = [[0, 2, 5, 7]] input.data = [[1.], [3.], [2.], [4.], [6.], [5.], [1.]] input.shape = [7, 1] output is a Tensor: out.shape = [3, 1] out.shape[0] == len(x.lod[-1]) == 3 out.data = [[1.], [2.], [5.]], where 1.=first(1., 3.), 2.=first(2., 4., 6.), 5.=first(5., 1.) Case 2: input is a 2-level Tensor containing 3 sequences with length info [2, 0, 3], where 0 means empty sequence. The first sequence contains 2 subsequence with length info [1, 2]; The last sequence contains 3 subsequence with length info [1, 0, 3]. input.lod = [[0, 2, 2, 5], [0, 1, 3, 4, 4, 7]] input.data = [[1.], [3.], [2.], [4.], [6.], [5.], [1.]] input.shape = [7, 1] It will apply pooling on last lod_level [0, 1, 3, 4, 4, 7]. pad_value = 0.0 output is a Tensor: out.shape= [5, 1] out.lod = [[0, 2, 2, 5]] out.shape[0] == len(x.lod[-1]) == 5 out.data = [[1.], [3.], [4.], [0.0], [6.]] where 1.=first(1.), 3.=first(3., 2.), 4.=first(4.), 0.0 = pad_value, 6.=first(6., 5., 1.) Args: input(Tensor): Tensor with lod_level no more than 2. The data type should be float32 or float64. Returns: Tensor: Tensor consist of the sequence's first step vector. The data type is float32 or float64. Examples: .. code-block:: python >>> # doctest: +SKIP("env set will not work in ci check because import paddle in global_exec") >>> # set env var before import paddle to disable pir mode, following example code use os module. >>> import os >>> os.environ['FLAGS_enable_pir_api'] = '0' >>> import paddle >>> paddle.enable_static() >>> x = paddle.static.data(name='x', shape=[None, 10], dtype='float32', lod_level=1) >>> x_first_step = paddle.static.nn.sequence_first_step(input=x) rrrsequence_first_stepfirstrrGrr?rs r8rKrKs+z wI.0E u 88r9c6[USSS/S5 [USS9$)a Only supports Tensor as input. Given the input Tensor, it will select last time-step feature of each sequence as output. .. code-block:: text Case 1: input is 1-level Tensor: input.lod = [[0, 2, 5, 7]] input.data = [[1.], [3.], [2.], [4.], [6.], [5.], [1.]] input.shape = [7, 1] output is a Tensor: out.shape = [3, 1] out.shape[0] == len(x.lod[-1]) == 3 out.data = [[3.], [6.], [1.]], where 3.=last(1., 3.), 6.=last(2., 4., 6.), 1.=last(5., 1.) Case 2: input is a 2-level Tensor containing 3 sequences with length info [2, 0, 3], where 0 means empty sequence. The first sequence contains 2 subsequence with length info [1, 2]; The last sequence contains 3 subsequence with length info [1, 0, 3]. input.lod = [[0, 2, 2, 5], [0, 1, 3, 4, 4, 7]] input.data = [[1.], [3.], [2.], [4.], [6.], [5.], [1.]] input.shape = [7, 1] It will apply pooling on last lod_level [0, 1, 3, 4, 4, 7]. pad_value = 0.0 output is a Tensor: out.shape= [5, 1] out.lod = [[0, 2, 2, 5]] out.shape[0] == len(x.lod[-1]) == 5 out.data = [[1.], [2.], [4.], [0.0], [1.]] where 1.=last(1.), 2.=last(3., 2.), 4.=last(4.), 0.0 = pad_value, 1=last(6., 5., 1.) Args: input(Tensor): Tensor with lod_level no more than 2. The data type should be float32. Returns: Tensor: Tensor consist of the sequence's last step vector. The data type is float32. Examples: .. code-block:: python >>> # doctest: +SKIP("env set will not work in ci check because import paddle in global_exec") >>> # set env var before import paddle to disable pir mode, following example code use os module. >>> import os >>> os.environ['FLAGS_enable_pir_api'] = '0' >>> import paddle >>> paddle.enable_static() >>> x = paddle.static.data(name='x', shape=[None, 10], dtype='float32', lod_level=1) >>> x_last_step = paddle.static.nn.sequence_last_step(input=x) rrrsequence_last_steplastrMrNrOs r8rQrQs+| wI.0D u 77r9c[5(aS5e[5(aS5e[US/SQS5 [S 0[ 5D6nUR SS9nUR U5nURSXS.SU0S U0S 9 U$) as Sequence Expand Layer. This layer will expand the input variable ``x`` \ according to specified level ``ref_level`` lod of ``y``. Please note that \ the lod level of ``x`` is at most 1. If the lod level of ``x`` is 1, than \ the size of lod of ``x`` must be equal to the length of ``ref_level`` lod \ of ``y``. If the lod level of ``x`` is 0, then the first dim of ``x`` should \ be equal to the size of ``ref_level`` of ``y``. The rank of **x** is at least 2. \ When rank of ``x`` is greater than 2, then it would be viewed as a 2-D tensor. Note: Please note that the input ``x`` should be Tensor or Tensor, \ and input ``y`` must be Tensor. **Following examples will explain how sequence_expand works:** .. code-block:: text Case 1 Consider 2 sequences [a][b] and [c][d], now we want to expand them to [a][b], [a][b], [c][d] and [c][d]. Sequence [a][b] expand twice and [c][d] expands twice, so the lod which according to is [2, 2]. Input x is a 1-level Tensor: x.lod = [[2, 2]] #lod based on length may be easier to understand x.data = [[a], [b], [c], [d]] x.dims = [4, 1] input y is a Tensor: y.lod = [[2, 2], #the 0th level lod, according to this level [3, 3, 1, 1]] #the 1st level lod, it has nothing to do with this level ref_level: 0 then output is a 1-level Tensor out: out.lod = [[2, 2, 2, 2]] #lod based on offset out.data = [[a], [b], [a], [b], [c], [d], [c], [d]] out.dims = [8, 1] Case 2 Consider 3 sequences [a], [b], [c], now we want to expand them to [a][a], [c][c][c]. It's obvious that the lod info of expanded sequences is [2, 0, 3]. x is a Tensor: x.data = [[a], [b], [c]] x.dims = [3, 1] y is a Tensor: y.lod = [[2, 0, 3]] ref_level: -1 then output is a 1-level Tensor: out.data = [[a], [a], [c], [c], [c]] out.dims = [5, 1] Args: x (Tensor): The input variable which is a Tensor or Tensor, with the \ dims ``[M, K]``. The lod level is at most 1. The data type should be \ float32, float64, int32 or int64. y (Tensor): The input variable which is a Tensor, the lod level is \ at least 1. ref_level (int): Lod level of ``y`` to be referred by ``x``. If set to -1, \ refer the last level of lod. name(str, optional): For detailed information, please refer \ to :ref:`api_guide_Name`. Usually name is no need to set and \ None by default. Returns: Tensor, The expanded variable which is a Tensor, with dims ``[N, K]``. \ ``N`` depends on the lod info of ``x`` and ``y``. \ The data type is same as input. Examples: .. code-block:: python >>> # doctest: +SKIP("env set will not work in ci check because import paddle in global_exec") >>> # set env var before import paddle to disable pir mode, following example code use os module. >>> import os >>> os.environ['FLAGS_enable_pir_api'] = '0' >>> import paddle >>> from paddle import base >>> paddle.enable_static() >>> import numpy as np >>> x = paddle.static.data(name='x', shape=[4, 1], dtype='float32') >>> y = paddle.static.data(name='y', shape=[8, 1], ... dtype='float32', lod_level=1) >>> out = paddle.static.nn.sequence_expand(x=x, y=y, ref_level=0) >>> exe = paddle.static.Executor(base.CPUPlace()) >>> place = paddle.CPUPlace() >>> np_data = np.array([[1], [2], [3], [4]]).astype('float32') >>> x_lod_tensor = base.create_lod_tensor(np_data, [[2, 2]], place) >>> print(x_lod_tensor) - lod: {{0, 2, 4}} - place: Place(cpu) - shape: [4, 1] - layout: NCHW - dtype: float32 - data: [1 2 3 4] >>> np_data = np.array([[1], [2], [3], [4], [5], [6], [7], [8]]).astype('float32') >>> y_lod_tensor = base.create_lod_tensor(np_data, [[2, 2], [3,3,1,1]], place) >>> print(y_lod_tensor) - lod: {{0, 2, 4}{0, 3, 6, 7, 8}} - place: Place(cpu) - shape: [8, 1] - layout: NCHW - dtype: float32 - data: [1 2 3 4 5 6 7 8] >>> out_main = exe.run(base.default_main_program(), ... feed={'x': x_lod_tensor, 'y': y_lod_tensor}, ... fetch_list=[out], return_numpy=False) >>> print(out_main[0]) - lod: {{0, 2, 4, 6, 8}} - place: Place(cpu) - shape: [8, 1] - layout: NCHW - dtype: float32 - data: [1 2 1 2 3 4 3 4] r rx)rrint32int64sequence_expand)input_param_name)rYr ref_levelr)rW)rrrrr"r#r&r()rTyrZr2r3rtmps r8rWrWsJ  > }} M  38:K 7fh 7F     4E  3 3E :C   I&  Jr9z"paddle.nn.functional.sequence_mask) update_tor cV[RRRXX#5$)a **SequenceMask Layer** This layer outputs a mask according to the input :code:`x` and :code:`maxlen` with data type of :code:`dtype`. Supposing :code:`x` is a Tensor with shape [d_1, d_2, ..., d_n], the :code:`y` is a mask with shape [d_1, d_2, ..., d_n, maxlen], where: .. math:: y(i_1, i_2,..., i_n, j) = (j < x(i_1, i_2,..., i_n)) .. code-block:: text Case: Consider input: x = [3, 1, 1, 0] max_len = 4 then we get out: mask = [[1, 1, 1, 0], [1, 0, 0, 0], [1, 0, 0, 0], [0, 0, 0, 0]] Args: x (Tensor): Input tensor of sequence_mask layer, \ whose elements are integers less than :code:`maxlen`. \ Tensor or Tensor with shape [d_1, d_2, ..., d_n]. maxlen (int, optional): Maximum length of the sequence. If :code:`maxlen` \ is None, it would be replace with :math:`max(x)`. dtype (np.dtype|paddle.dtype|str, optional): Data type of the output, \ ``int64`` by default. name(str, optional): For detailed information, please refer \ to :ref:`api_guide_Name`. Usually name is no need to set and \ None by default. Returns: Tensor, The output sequence mask. Tensor with shape [d_1, d_2, ..., d_n, maxlen] and data type of :code:`dtype`. The data type should be bool, float32, float64, int8, int32 or int64. Examples: .. code-block:: python >>> import paddle >>> lengths = paddle.to_tensor([10, 9, 8]) >>> mask = paddle.nn.functional.sequence_mask(lengths) >>> print(mask.numpy()) [[1 1 1 1 1 1 1 1 1 1] [1 1 1 1 1 1 1 1 1 0] [1 1 1 1 1 1 1 1 0 0]] )paddlenn functional sequence_mask)rTmaxlenrr2s r8rbrbs"~ 99   - -a EEr9)rTNNNNN)FN)Fg)N)NrVN)r_paddle.base.data_feederrpaddle.base.frameworkrrpaddle.base.layer_helperr paddle.utilsr__all__rr;r?rKrQrWrbr9r8rls0<>0#   _  P-  P-f  _ [  [|  _ z  zz  _ ;9  ;9|  _ <8  <8~  _ R  Rj 2 ;F ;Fr9